Pinto Cam blanks for roller cam

[Tom Murphy]

Hi,

I am looking for a company that can sell me pinto cam blanks for a roller cam. Ideally the cams should be billet steel but chill cast may be ok.

I want to get duplicate cam made by Crane Cams in the US but they no longer have blanks for the pinto cam.

Thanks in advance

Regards
Tom

[jim111]

have you tried kent cams in the uk or piper cams also in the uk

[Matt1975]

Esslinger do a roller cam don't they?

Matt

[Tom Murphy]

Kent and piper do the cams but they are not suitable for roller profiles as the shape of the lobe is much wider on the roller cam. I will be ringing around on Monday to see what they can do for me.

Thanks for the replies

Best Regards
Tom

[Danny M]

Tighe Cams in Brisbane Australia make induction hardened steel billets and talk to Dean

[Tom Murphy]

Thanks Danny,

I will be ringing them on Monday to see if they can sell me a blank. Sounds like a good quality product.

Regards
Tom

[Danny M]

I would prefer their blank over any others and they can probably grind the profile as well

[monaroman68]

Try Brian Cassar at Moe Racing Engine in Victoria , he has a stock off crane billet blanks for pinto's been put in storage for years
Cheers Dave

[Tom Murphy]

A stock of Crane billet cams sounds perfect. Thanks again for all the answers. I will be making a lot of phone calls on Monday to see what is available and will report back.

Tom

[Tom Murphy]

[Tom Murphy]

Found an email and have been in contact, Thanks