Page 1 of 1
2ltr into 1.6
Posted:
Wed Sep 24, 2008 8:32 pmby dougo
Hi again all.....two questions...firstly....are the 1.6 and 2 ltr engine mounts the same...ie the "U" shaped metal brackets..(long and short)...secondly are the RS2000 alloy engine mounts the same size or one short one long.....All help gratefully received....Cheers Doug
Posted:
Thu Sep 25, 2008 3:49 amby Miniliteman
Hi,
yes both the 1.6 and 2.0 engine-mounts are the same. (same block only the 1.6 is shorter at the top).
RS2000 alloy mounts are different length: the longer one goes on the left side of the engine. (at least over here ...).
Leon.
Posted:
Thu Sep 25, 2008 8:19 amby jsa
1.6 pushrod are different
Leon is talking 1.6 pinto.
Posted:
Thu Sep 25, 2008 10:37 amby dougo
Posted:
Thu Sep 25, 2008 1:45 pmby Gary P.
Posted:
Thu Sep 25, 2008 7:02 pmby dougo
Posted:
Fri Sep 26, 2008 8:51 pmby chris pfeiffer
Hi dougo
They are the same , a pinto will go where a kent was and visa versa
Chris