lima billet head
Posted: Fri Feb 22, 2008 7:39 amits not a pinto but many call it pinto 
here is some picture of the finnish billet head
here is some picture of the finnish billet head
Here is some more, lifted from the TS site..
"yup. the head is billet aluminum and made here in Finland it is a ford ranger 2.5 litre engine to start with, that'll get new pistons and crankshaft n rods, so it will be bit bigger
52mm (about 2.04inch) intake valve, 40mm(about 1.57inch) exhaust valve. Intake flow at 18mm lift: 322cfm@28inch. exhaust at 18mm lift: 192cfm@28inch.
Cam is a billet steel roller, lift around 17.5mm. "
[/img]