RS Motorsport :: Classic Speed Restored

I'm chasing a set (4) of 30mm trumpets for my Twin Carbs- Dellorto 40's

David,

i have a set of 30mm full radius trumpets if you are interested.
http://www.dellorto.com/merchandise/pro ... ctionID=84
they are these ones in silver, which it doesnt look like they make anymore.
i used them for about 2 weeks, still have cork gaskets on them. 1 has a slight dent in it where the bolt from the carb was.

Garry

Will they fit inside K & N Filters ?

http://www.burtonpower.com/d4030s.html

hmmm.... i have no idea. i dont use K & N Filters, but the outer diameter is 88mm if that helps.
let me know
cheers
Garry

Do they have to be 30mm long?

I can do you a custon set if required, any length you like

Cheers
Woz

David, check out this one as they are 30mm high......