Page 1 of 1
Clutch Fork Pivot Bolt
Posted:
Thu Apr 19, 2012 5:13 pm
by Gary P.
I am after a Clutch fork pivot bolt for a 2 Litre Pinto. The hex head in the one on the racecar is totally stuffed and I had to remove it with vice grips. So i'm after one with the hex in reasonable condition.
Re: Clutch Fork Pivot Bolt
Posted:
Thu Apr 19, 2012 7:01 pm
by ozstang65
Tried a bolt shop? Might be close to one of the standard Unbrako ones?? Either that or get a standard socket head cap screw and get a spacer machined up for it.
Re: Clutch Fork Pivot Bolt
Posted:
Thu Apr 19, 2012 8:16 pm
by Darren W.
From memory an old door hinge pin is the right diameter, just cut to length was my fix on a HT cap screw. But I think this type is still avail. from FORD as I reconized one a few months back in the YA - YE parts bins but didn't write down the location.
Re: Clutch Fork Pivot Bolt
Posted:
Thu Apr 19, 2012 8:46 pm
by jsa
gary,
Might get lucky with a shoulder socket head set screw.
Or as suggested, sleeve on SHSC.
Re: Clutch Fork Pivot Bolt
Posted:
Fri Apr 20, 2012 12:56 pm
by bmw02rally
Gary,
I might have something as my old Pinto and Clutch is all just sitting there.....
I'll have a look tonight!
Mark
Re: Clutch Fork Pivot Bolt
Posted:
Sat Apr 21, 2012 9:51 am
by Gary P.
Re: Clutch Fork Pivot Bolt
Posted:
Sat Apr 21, 2012 9:52 am
by Gary P.
Re: Clutch Fork Pivot Bolt
Posted:
Sat Apr 21, 2012 11:03 am
by bmw02rally
No luck this time though mate! Mr. King and I just had a look, it must still be on my alloy bellhousing that went to Mr McNab.
Sorry dude!
Re: Clutch Fork Pivot Bolt
Posted:
Sat Apr 21, 2012 12:36 pm
by Gary P.
Thanks mate, Mr King told me personally!!
Re: Clutch Fork Pivot Bolt
Posted:
Sat Apr 21, 2012 7:56 pm
by ozstang65
Re: Clutch Fork Pivot Bolt
Posted:
Tue Apr 24, 2012 9:40 pm
by jsa
Compare this
Re: Clutch Fork Pivot Bolt
Posted:
Wed Mar 09, 2016 3:09 pm
by stuart
Does anyone know what size and height it should be?
Re: Clutch Fork Pivot Bolt
Posted:
Wed Mar 09, 2016 11:58 pm
by Danny M
For a 2lt or a 1600
Re: Clutch Fork Pivot Bolt
Posted:
Thu Mar 10, 2016 10:22 am
by stuart
2LT