RS Motorsport :: Classic Speed Restored

Has anyone got a surplus bracket to anchor/hold the throttle cable in place to suit a pair of Delorttos? The carbs are all intact and the connection that holds the throttle cable to the linkage arms is there (held in place via the 'C' clip - I just need the piece that holds the cable in place so it moves when the accelarator is pressed towards the floor thereby creating acceleration.

Another important piece of equipment that I can't put my hands on as I put this car back together.

Thanks

Just make one ...

I made one for my old dellorto's that uses the centre manifold bolt. I had it running with a standard escort 2 litre cable.

I have dont the same for the IDF's that i am now running.

A bit of 5 or 6mm flat, a drill and a vice is all you need