RS Motorsport :: Classic Speed Restored

Hey, I'm trying to source the maker of these strut tops. Anyone have an idea?

Ring Geoff at race parts / eurospeed

better off talking to mark cogan , he wont talk too much crap
just use ear plugs if you get geoff
& tell him danny recomended you

Thats not all Geoff would talk about!!!!!

Look like GRP4 to me.

I have the Eurospeed ones as per the pic.

Both the same though.

Cheers

Matt

Thanks everyone. I've found the bloke who actually made these ones, he's helping me out.

In the mean time, I'm trying to figure out out to make the Billstein struts fit with them. Anyone got photos of the spring seat and collars used in theirs? I don't have much thread to tighten up with either...

these are the Grp4 ones:

http://www.grp4fabrications.com/product ... cts_id=837


thanks guys

I have the same strut tops from Eurospeed

I brought these & then turneed them down by approx 1mm in a lathe - took all of 10min

http://www.grp4fabrications.com/product ... cts_id=269

easy fix

Turned them down 1mm? This looks like exactly where we're going. So far we're going to the path of altering the top spring seat slightly, removing 2 mm off the shock flange and making a sleeved nut.

These are great, however ideally, the creator of these particular ones should source a slightly larger rose joint by approx 1mm, hint hint.