Page 1 of 1
2.5inch ID coil springs
Posted:
Mon Apr 02, 2012 4:12 pmby bmw02rally
Gents....where's the best place to source some of these on the Gold Coast or in Brisbane?
After this weekend I realise that my springs are far to hard for the loose and I need some 145lbs to 160lbs springs and approx 250mm-350mm length.
Mark
Re: 2.5inch ID coil springs
Posted:
Mon Apr 02, 2012 4:56 pmby rs turbo
king springs mate ...
Re: 2.5inch ID coil springs
Posted:
Mon Apr 02, 2012 5:43 pmby Gary P.
Ditto
Re: 2.5inch ID coil springs
Posted:
Mon Apr 02, 2012 5:44 pmby bmw02rally
Thanks lads....
Re: 2.5inch ID coil springs
Posted:
Tue Apr 03, 2012 1:27 pmby gen mk 1rs2000
i get "family" discount
Re: 2.5inch ID coil springs
Posted:
Tue Apr 03, 2012 1:37 pmby bmw02rally
So you should!
Re: 2.5inch ID coil springs
Posted:
Tue Apr 03, 2012 2:47 pmby Gary P.
Re: 2.5inch ID coil springs
Posted:
Tue Apr 03, 2012 4:07 pmby bmw02rally
Okay where could I get some of these Nuts to fit the Bilsteins and also space out the spherical bearing in Australia.
All the Escort places seem to sell them in the UK but do you reckon I could get them locally?
This is what I lost on the rally...
Mark
Re: 2.5inch ID coil springs
Posted:
Tue Apr 03, 2012 4:51 pmby gen mk 1rs2000
determine the thread then a 2 min job on lathe
it looks like an old mag wheel nut turned down ??
after seeing this failure there must have been a reason
why i put a split pin above the nut in my car ??
Re: 2.5inch ID coil springs
Posted:
Tue Apr 03, 2012 6:01 pmby bmw02rally
Its 5/8 unf.
Re: 2.5inch ID coil springs
Posted:
Tue Apr 03, 2012 7:04 pmby proey