Rear Bulkhead Sealing
Posted: Thu Nov 04, 2010 5:57 pmRS Motorsport :: Classic Speed Restored
Carrying on from \"The Works Escorts\" forums of years past, RS Motorsport is dedicated to those small Fords from the Golden Era of Motorsport, namely the 60's, 70's and 80's.
http://rsmotorsport.com.au/forums/
Rear Bulkhead Sealing
Page 1 of 1
Posted: Thu Nov 04, 2010 5:57 pmRe: Rear Bulkhead Sealing
Posted: Thu Nov 04, 2010 6:31 pmR U 4 Linking ?
Re: Rear Bulkhead Sealing
Posted: Thu Nov 04, 2010 7:03 pm6 link and turrets
Re: Rear Bulkhead Sealing
Posted: Thu Nov 04, 2010 8:44 pmWhat category are you planning to compete in?
Best check the regs before removing too much metal.
Best check the regs before removing too much metal.
Re: Rear Bulkhead Sealing
Posted: Thu Nov 04, 2010 9:40 pmRe: Rear Bulkhead Sealing
Posted: Thu Nov 04, 2010 9:46 pmI added 1.6mm sheet metal panel, between inner guards.
Filled the rest with 1mm alloy SM and pop riveted on etc.
PS even got sheet size for ya
Filled the rest with 1mm alloy SM and pop riveted on etc.
PS even got sheet size for ya
Re: Rear Bulkhead Sealing
Posted: Thu Nov 04, 2010 10:02 pmYour a true gentleman Roger. 
Re: Rear Bulkhead Sealing
Posted: Fri Nov 05, 2010 12:56 amI copied Roger too 
Well I filled the holes with 0.9 Galv on C-pillars, parcel shelf, and boot edges, and built a 1.6mm alloy wall where rear seat use to be!
Well I filled the holes with 0.9 Galv on C-pillars, parcel shelf, and boot edges, and built a 1.6mm alloy wall where rear seat use to be!
Re: Rear Bulkhead Sealing
Posted: Fri Nov 05, 2010 3:53 pmRe: Rear Bulkhead Sealing
Posted: Fri Nov 05, 2010 6:55 pmso thats what you use? how ya find them?