Page 1 of 1
Gearbox ID and ratios
Posted:
Sun Mar 19, 2006 3:14 pmby Daniel H
Re: Close Ratio Gearbox
Posted:
Sun Mar 19, 2006 4:05 pmby Roger Miller
gearboxes
Posted:
Sun Mar 19, 2006 5:24 pmby Daniel H
Posted:
Thu Mar 23, 2006 11:41 amby tudor gt
Standard box has about 3.5 first gear.
If you can get it the GT close ratio box is better for the street, but you can still break them with a heavy foot.
GT box looks exactly the same, only way to check is do the numbers on the input/output shafts
close ratio not!
Posted:
Thu Jan 11, 2007 3:29 pmby Daniel H
found out it's not close ratio but still trying to figure out what it is
extension housing where shifter sits is deeper than the gearbox in the 4door.
roger: what did u mean by do the numbers?
input shaft is 23 spline
output shaft is 25 spline
any ideas anyone?
daniel
Posted:
Sun Jan 14, 2007 8:57 pmby Neville Bertwistle
Posted:
Sun Jan 14, 2007 9:55 pmby Daniel H
Posted:
Wed Feb 28, 2007 11:07 amby Daniel H
Posted:
Sat Mar 10, 2007 12:17 pmby Daniel H
Posted:
Sat Mar 10, 2007 12:18 pmby Daniel H
Posted:
Sat Mar 10, 2007 1:10 pmby Neville Bertwistle
Posted:
Wed Mar 14, 2007 9:08 pmby Roger Miller
Pic below is Escort 2 liter box.
Note gear lever position.
Posted:
Wed Mar 14, 2007 9:10 pmby Roger Miller
Basic Ford box ID.
This box ID graphic is for UK boxes.
Remember we are a little different over here.
Posted:
Thu Mar 15, 2007 1:08 amby gen mk 1rs2000
Posted:
Thu Mar 15, 2007 8:48 amby Daniel H
Posted:
Thu Mar 15, 2007 12:11 pmby shaunb
Posted:
Sat Mar 17, 2007 4:57 pmby Danny M