Page 1 of 1
Does anyone know a Bruce Cook that owns an Escort race car ?
Posted:
Wed Jul 29, 2009 1:22 pmby Damion Parkin
I have just been talking to Jim Berry and he was telling me about a fella by the name of Bruce Cook that has an Escort running a Supra box and apparently there is some special part to get the input shaft to line up with the spigot bush correctly..
Jim was saying the input shaft falls short of the spigot in the back of the crank.
I wouldn't mind tracking Bruce down to find out if he would be willing to have a chat with me about this some more.
Posted:
Wed Jul 29, 2009 4:00 pmby Mark D
It's probably Bruce with the Turbo Cosworth Mk1. Danny should have his number if you want to give him a call.
Cheers
Mark D
Posted:
Wed Jul 29, 2009 4:20 pmby mickas
Its a sleeve that goes on to the supra input shaft , so you can use the standard spigot bush.The numbers on the packet are...
IR12x15x22,5 which are the dimensions.
Its a high tesile sleeve that is finely machined.It has other numbers on the packet which are(no distictive part number) I got it from a bearing shop that had to be ordered.
000020605-0000-01
0095A0627
/3411788
You use a sleeve glue on it , and tap it on till it bottoms out.
Posted:
Wed Jul 29, 2009 6:05 pmby Danny M
Damion give me a call or an SMS andI'll give you his details as I see him most days
Danny 0409 470055
Posted:
Thu Jul 30, 2009 7:37 pmby Damion Parkin
Posted:
Thu Jul 30, 2009 9:23 pmby jsa
Posted:
Thu Jul 30, 2009 11:06 pmby Damion Parkin
Posted:
Fri Jul 31, 2009 8:36 amby jsa
Posted:
Fri Jul 31, 2009 10:47 amby Damion Parkin
Posted:
Fri Jul 31, 2009 11:39 amby jsa
Posted:
Fri Jul 31, 2009 8:41 pmby Damion Parkin
Posted:
Fri Jul 31, 2009 9:45 pmby gen mk 1rs2000
Posted:
Fri Jul 31, 2009 10:33 pmby Damion Parkin