Page 1 of 1
Carb Balancers

Posted:
Mon Jun 22, 2009 4:37 pm
by Mik Kay

Posted:
Mon Jun 22, 2009 9:30 pm
by Roger Miller
800 mm of 3/8" rubber tube

Posted:
Mon Jun 22, 2009 9:40 pm
by shaunb
I bought one of those synch meters off ebay ($90) and have been quite happy with it.
If you have sidedrafts on an Escort however you will need to make up a dogleg or 90 deg adaptor as they wont fit between the inner guard and the carb......or you can do what I did and buy the correct adaptor part from Burtons.
Cheers
Shaun B

Posted:
Thu Jun 25, 2009 11:55 am
by Mik Kay
Thanks for the replys. Have tryed in the past to tune barbs by ear with not much luck roger so i dont even try anymore. Have looked at the item you mention shaun but i am a little concerned about having a 90 degree bend into the carb and this giving a false reading. Anyway have spent the last few days speaking to different people and this is what i have purchased.
www.carbtune.com
Thanks
Mik

Posted:
Thu Jun 25, 2009 12:36 pm
by neil
Hi Mik, wouldn't you have to have a vacume port on each intake runner to hook it up to?. like motorcycles do.

Posted:
Fri Jun 26, 2009 5:00 pm
by peelo