Page 1 of 1

Mk2 rs2000 coil wiring

PostPosted: Wed May 13, 2015 3:47 am
by Tonypastie
Hi just putting my 4 door rs back together after a restoration
I can,t work out the colours for the coil I have a couple of wires over and I anit sure where the go?
I need to wire the coil unsure what wires ?
Also need to wire the dizzy ?

Anybody no or got a picture to assit me ?

Re: Mk2 rs2000 coil wiring

PostPosted: Wed May 13, 2015 4:34 am
by Miniliteman
Can you post a photo or tell us what colour wires you have?

Set up over here was simple;
coil has a post marked with a + and one with a -.
+ has a black/yellow wire and this splits bot far from the coil into 1 wire to the ignition-key and one to the startermotor (boost voltage for starting).
- has a green wire to the points in the distributor (only wire to this) and if you have a revcounter this wire also splits into two greens (one to the dizzy and one to the revcounter).