RS Motorsport :: Classic Speed Restored

Posted: **Sun Mar 14, 2010 10:33 pm**

I'd be looking at around a 13cfm unit. If you are painting 'in the backyard' you will probably only be using acrylic which will need a smaller nozzle size than 2pack. I think I have used a 1.4mm nozzle for acrylic in the past. Definitely need a water trap/regulator (usually a single unit). I've never used an oil trap, but that may depend on the compressor.

Gun quality will affect results. I bought a gravity feed unit for less than $100 but I could never get the same results as an 'old faithful' suction type. The suction types are much more user friendly as you have to have somewhere to hang a gravity feed gun (PITA sometimes).

Posted: **Sun Mar 14, 2010 10:44 pm**

Posted: **Wed Mar 17, 2010 4:32 pm**

Posted: **Wed Mar 17, 2010 5:21 pm**

Posted: **Thu Mar 18, 2010 12:59 am**

Posted: **Fri Jun 11, 2010 10:03 pm**

Posted: **Sat Jun 12, 2010 9:20 am**

INB Replica , tell us more about your car , it sounds INTERESTING ????

Posted: **Sat Jun 12, 2010 9:55 am**

RS Motorsport :: Classic Speed Restored

Compressor

Compressor