Datsun Rods
Posted: Tue Jul 17, 2007 12:17 pmThinking of using some datsun OHC rods in my xflow...Has anyone done this already? The crank is standard, What size bearings would i have to use?
Crank
RS Motorsport :: Classic Speed Restored
Carrying on from \"The Works Escorts\" forums of years past, RS Motorsport is dedicated to those small Fords from the Golden Era of Motorsport, namely the 60's, 70's and 80's.
http://rsmotorsport.com.au/forums/
Datsun Rods
Page 1 of 1
Posted: Tue Jul 17, 2007 12:17 pmPosted: Tue Jul 17, 2007 8:09 pmPosted: Wed Jul 18, 2007 2:47 pmi'm using a standard uncut xflow crank with Datsun rods if possible?
Posted: Wed Jul 18, 2007 8:24 pmA friend of mine used Datsun rods (I think) he combined it with a Datsun crank as well. Why are you using standard crank and Datsun rods? The crank is the weaker than the standard rods.
I'll see if I can get some details from my mate (he has sold the car and no longer lives in Australia)
I'll see if I can get some details from my mate (he has sold the car and no longer lives in Australia)
Posted: Fri Jul 20, 2007 7:08 amPosted: Fri Jul 20, 2007 7:43 amPosted: Fri Jul 20, 2007 10:04 amPosted: Fri Jul 20, 2007 10:48 amPosted: Fri Jul 20, 2007 7:48 pmPosted: Sat Jul 21, 2007 7:53 pm